IoT & Industrial Integration

Connect Any Machine,
Any Protocol.

Universal connectivity layer that speaks every industrial protocol - digital and analogue inputs, serial, Modbus, MQTT, OPC UA, PLC, camera streams. Real-time data from any equipment, regardless of age or manufacturer.

Connect
Streaming
Industrial protocols · Live data
200+
Protocols
<10s
Latency
What the layer speaks

Every protocol your floor uses.
Live, in one stream.

Eight industrial protocols out of the box. Legacy relay outputs and modern Ethernet PLCs land in the same data pipeline.

PLC connectivity

Siemens, Allen-Bradley, Mitsubishi, Beckhoff - read and write tags from the floor.

🔌

OPC UA

The modern industrial standard. Secure, semantic, vendor-neutral.

🔄

Modbus TCP/RTU

Ubiquitous on sensors, drives and meters. TCP and serial variants supported.

📡

MQTT

Lightweight pub/sub for IoT devices, edge gateways and remote sites.

Serial RS232/485

Bridge legacy equipment that never spoke Ethernet into the central platform.

🔌

Digital & analogue I/O

Plain on/off signals and 4-20mA measurements - the floor's lowest common denominator.

🎥

Camera streams

RTSP / IP camera feeds into the same platform - ready for vision AI workflows.

🔗

Custom adapters

Anything proprietary or unusual - we build a connector and add it to the library.

Why the layer is different

One stream. Any age.
Minutes to connect.

Three properties that make the difference between a working integration and a six-month systems-integrator project.

Capability 1

Sub-second latency

Live data from every device, normalised at the gateway. Downstream modules read fresh values, not yesterday's CSV.

Stream · live
< 1 second end-to-end
Capability 2

Plug-and-play adapters

Pre-built protocol drivers, auto-discovery and a guided wizard. A new machine is connected and streaming in minutes.

Connect time
Minutes, not weeks
Capability 3

Legacy & modern, one platform

1990s presses with relay outputs and 2025 PLCs with OPC UA both end up as the same normalised event in the same store.

Unified data store
One source of truth
At the integrator's bench

How a device gets online.

🔎

Auto-discovery

Scan the network. Devices that speak any supported protocol announce themselves and are queued for adoption.

Scan 192.168.10.0/24
Found 12 devices · 4 PLCs, 6 sensors, 2 cameras
🔧

Guided adapter wizard

Pick the protocol, map the tags, name the asset. Pre-built adapters mean no custom code for standard equipment.

Pick Modbus TCP · Press M2
Map 12 tags → OEE schema · Save
📊

Live verification

See values streaming the moment the connector goes live. No waiting for the next batch run.

M2 · Cycle 14.2s · Temp 64°C
Last 142ms ago · OK
Check use cases

What connected equipment
unlocks downstream.

Four use cases that depend on a live data feed from the floor. Each links to a deeper write-up with methodology, integrations and KPIs.

Technical specification

Built to be trusted.

SpecificationDetail
Industrial protocolsPLC (Siemens, Allen-Bradley, Mitsubishi, Beckhoff) · OPC UA · Modbus TCP/RTU · MQTT
Low-level I/ORS232 · RS485 · Digital I/O · Analogue 4-20mA / 0-10V
VisionRTSP / IP camera streams · image queue for vision AI workflows
End-to-end latency<1 second for most protocols, <10 seconds worst case
Adapter libraryPre-built drivers for standard protocols · custom adapters built on request
DiscoveryNetwork scan with auto-classification · guided adoption wizard
Edge gatewayBuffers on connection loss, replays on reconnect · store-and-forward
Data modelNormalised event store · consistent schema across all sources
SecurityTLS in transit · signed adapters · per-asset access control
Time to connectStandard device: minutes · custom protocol: days, not weeks

Bring us
your hardest device.

Old machine, obscure protocol, missing documentation - we'll show how the layer connects it and starts streaming, live on a 20-minute demo.

Request a Demo